深圳市迅瑞创芯科技有限公司为您免费提供中山马达驱动IC,中山LED手电筒控制IC,中山DCDC升压IC等相关信息发布和资讯展示，敬请关注！
可双向控制电机的芯片有那些？SA8870C有刷直流电机驱动器怎么样？
Description
The SA8870C device is a brushed-DC motor driver for robotics, appliances, industrial equipment, and other small machines. Two logic inputs control the H-bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 4.5A peak current. The inputs can be pulse width modulated (PWM) to control motor speed, using a choice of current-decay modes. Setting both inputs low enter a low-power sleep mode.
The SA8870C device features integrated current regulation, based on the analog input VREF and the voltage on the ISEN pin, which is proportional to motor current through an external sense resistor. The ability to limit current to a known level can significantly reduce the system power requirements and bulk capacitance needed to maintain stable voltage, especially for motor startup and stall conditions.
The device is fully protected from faults and short circuits, including undervoltage (UVLO), overcurrent (OCP), and overtemperature (TSD).
When the fault condition is removed, the device automatically resumes normal operation.
Features
? 4.5 to 40.0 V Operating Voltage
? 350-mΩ Typical RDSON (HS + LS)
? 4.5A Peak Current Drive
? PWM Control Interface
? Integrated Current Regulation
? Low-Power Sleep Mode
? H-Bridge Motor Driver
– Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads
? Integrated Protection Features
– VM Undervoltage Lockout (UVLO)
– Overcurrent Protection (OCP)
– Thermal Shutdown (TSD)
– Automatic Fault Recovery
? ESOP8 Package Available
Applications
? Robotics (Sweeping robot, R/C servo)
? 2-4 Li Battery Motor Applications
? Appliances
? Industrial Equipment
? Any Relevant DC Motor Applications.
中山马达驱动IC哪家好？中山LED手电筒控制IC报价是多少？中山DCDC升压IC质量怎么样？深圳市迅瑞创芯科技有限公司专业承接中山马达驱动IC,中山LED手电筒控制IC,中山DCDC升压IC,锂电充电IC,,电话:0755-86003350
了解详情>
了解详情>
了解详情>
二维码扫一扫
